top of page

How Much Does a Roof Lantern Cost? A Practical Buying Guide

Writer: Justin stone
Justin stone
Oct 25
4 min read

Roof lantern prices depend on the size, pane layout, glass specification and frame finish you choose. As checked on 20 October 2026, Lumina Design’s stock and special-offer range starts at £875.64, including VAT and UK delivery. That is a starting supply price for a specific configuration, rather than the cost of a complete installed roof.


The most useful budget separates the lantern itself from the building work needed to fit it. This guide explains the current starting prices, what changes the quotation and the questions to ask before ordering.


Cover image: illustrative CGI of a roof lantern; not a photograph of a customer installation.


Current Lumina roof lantern starting prices


Roof lantern range

Starting configuration

Supply price

Atlas Stock & Special Offers

1000 × 1000 mm square; Standard glazing

From £875.64

Atlas Contemporary 2.0

1000 × 1000 mm; Activ Clear self-cleaning glazing

From £884.29

Atlas Traditional

1000 × 3500 mm; 6 pane; Activ Clear self-cleaning glazing

From £1,906.67


Prices checked against Lumina’s catalogue on 20 October 2026. VAT and UK delivery are included unless otherwise stated on the product listing. These are different sizes and layouts, so the rows are not a like-for-like comparison. The selected configuration, current availability and final order details determine your price. No coupon discount has been deducted from these figures.





What changes the price of a roof lantern?


1. Size and pane layout


Confirm the length and width before comparing quotations. A larger lantern may require a different pane arrangement, so price does not necessarily rise in a straight line with area. Two lanterns described with similar dimensions can also have different numbers of panes and different views from below.


Look at the drawing for the size being quoted. A photograph of a smaller model may not show the bars or proportions of a larger one. If you are still designing the extension, compare a suitable stock size with the made-to-measure alternative before your builder constructs the kerb.


2. The glass specification


Glazing is worth comparing carefully. Lumina’s current Atlas configurations include standard glass options with a glazing U-value of 1.2 W/m²K and premium options at 1.0 W/m²K. These figures describe the glass, rather than the complete roof lantern.


Heat-loss performance and summer comfort are separate considerations. Ask for the solar-energy transmittance, often called the g-value, when comparing solar control. A solar-reflection percentage should not be presented as the same percentage of total solar heat kept out. Choose the glass for the room’s orientation, shading and intended use, rather than using U-value alone.


3. Frame finish and special requirements


Check that quotations specify the same internal and external frame colours. If you need a bespoke finish, a special glazing build-up or a layout outside the online options, request a quotation for that exact specification. Do not assume that an option shown on one product is available at the same price on every lantern.


4. Stock availability and the required delivery date


A stock configuration can be a useful starting point when keeping expenditure under control. Confirm that the correct size, finish and glass are available before arranging installation. If timing is critical, ask us to check the expected delivery date for the precise order instead of planning around a general lead-time estimate.


Supply price versus the full project budget


Lumina Design is a supply-only specialist. The lantern quotation should be considered alongside your installer’s quotation, so you can see the complete cost of the project.


  • Lantern supply: the exact size, pane layout, glazing and frame finish.

  • Roof preparation: the supporting structure, kerb upstand and any changes needed to the existing roof.

  • Installation and weatherproofing: fitting, roof covering interfaces and finishing the internal opening.

  • Access and handling: suitable access equipment and arrangements to move the frame and glass safely.

  • Other agreed work: waste removal, decorating and any electrical work required by additional equipment.


Ask your installer to identify what is included and what is an extra. A replacement in a prepared opening and a new opening in an existing roof can involve very different work. We have not added a generic installation allowance here because it could give a misleading total for your property.


How to compare two roof lantern quotations fairly


  • Match the ordering dimensions and confirm whether they refer to the external finished kerb.

  • Check the actual drawing, pane arrangement and internal and external colours.

  • Match the glass specification; distinguish glazing U-values from whole-product ratings.

  • Compare the VAT-inclusive total and check delivery coverage and any stated conditions.

  • Separate the product price from roof preparation, fitting and finishing.

  • Confirm availability, delivery arrangements and the terms supplied with each quotation.


For the Atlas lanterns linked above, use the external finished kerb dimensions. Avoid ordering from the ceiling opening alone. Have your installer check the product-specific measuring and fitting information before the kerb is finalised. A small saving on the lantern is quickly lost if the opening needs altering.


Frequently asked questions


Does the roof lantern price include fitting?


No. Lumina supplies the roof lantern; installation and associated building work are arranged separately. Ask your installer for a clearly itemised quotation.


Are VAT and delivery included?


The prices in this guide include VAT and UK delivery, based on the product information checked on 20 October 2026. Review the current listing for any stated exceptions and confirm delivery arrangements for your address before ordering.


Will a stock size always be cheaper?


Not necessarily for every comparison. Check the same dimensions, glass and finish before deciding. A stock option is worth pricing early, but the correct product and fit matter more than the lowest headline figure.


Should I choose the lowest U-value?


Consider heat loss alongside daylight, appearance and solar performance. Check whether the quoted rating is for the glass or the whole product. We can help you compare the available specifications for your project.


Can I get a quote by phone or email?


Yes. Send your proposed external kerb dimensions, preferred frame colours, glass requirements and delivery postcode. Tell us whether the opening is already built and when you expect to need the lantern. We can check the suitable options before you place the order.


Get a roof lantern price for your project


Call Lumina Design on 01656 630037 or email sales@luminadesign.co.uk with your dimensions or drawings. We will help you compare the specification, clarify the ordering measurements and obtain a price for the roof you actually need.




 
 
 

Recent Posts

See All

Comments


bottom of page